Product Categories

Contact Us

Add:No.18, Tannan Road, Tanjia Industrial Village, Gongming Street, Guangming New District, Shenzhen, China





Home > News > Content
What Is The Size Of SMD Patch Components?
Mar 12, 2018

  SMT processing plants often have some common knowledge about SMT processing. As the person who is most familiar with SMT processing, SMT processing plants are undoubtedly the most talkative. Today, we will focus on the packaging dimensions of SMT processing components and hope to help everyone.

The package size of SMD-machined SMD components, and SMT-processed SMD resistors, are commonly packaged in nine types and are represented by two size codes. A size code is an EIA (Electronic Industry Association) code represented by a 4-digit number. The first two and the last two digits represent the length and width of the resistor, respectively, in inches.

unit. The 0603 package we often say refers to the English code. The other is the metric code, which is also represented by 4 digits and its unit is mm. The following table shows the relation between the imperial and metric and the detailed dimensions of the chip resistor package: for example, a 0.127mm (5 mil) thick ladder laser cut

Electropolishing the template to meet the solder paste screen printing on the circuit board. Because the release properties of solder paste are not yet known, some pad designs contain intra-plate holes and the determination of this is entirely dependent on the conventional template design test. Results The pores of all 0201 devices were designed to:

The ratio of pads is 1:1. Since this circuit board also contains other components including CCGA devices, a 0.127mm (5 mil) thick template may be the thinnest template, and no design steps are needed to prevent damage to the board. Other devices

Pieces of solder joints. The aspect ratio from this design is between 2.4 and 3.2. The area ratios of the areas range from 0.72 to 0.85. Based on these values, excellent solder paste release effects can be expected.