Product Categories

Contact Us

Add:No.18, Tannan Road, Tanjia Industrial Village, Gongming Street, Guangming New District, Shenzhen, China

Tel:+86-755-22211988

Fax:+86-755-83768890

E-mail: frankwu@topscom.com.cn

News

Home > News > Content
Tooling DesignDesign Steps
Aug 28, 2017

Tooling Design refers to the digital design of enterprise mold, including cavity mold and cold die, in the traditional mold design, based on the full application of digital design tools to improve the quality of mold design, shorten the mold design cycle staff. Mold design staff in the mold NC programming, mold three-dimensional design, product development, three-dimensional design and other fields of employment.

Mold, is a specific form of a certain way through the material molding of an industrial products, but also to produce in batches with a certain shape and size requirements of industrial products, a production tool parts. Large aircraft, cars, small cups, nails, almost all industrial products must rely on mold molding. The high precision, high consistency, and high productivity of mold parts are unmatched by any other processing method. Mold to a large extent determine the quality of products, benefits and new product development capabilities. So the mold has "the mother of industry," the honorary title.

Design steps

1. The feasibility of the design of the mold of the product analysis, the computer chassis, for example, the first component of the product design drawings using the design software analysis, that is, work in the set diagram to ensure that the mold design before the correctness of the product drawings , On the other hand can be familiar with the importance of the components in the entire chassis to determine the size of the focus, so that the mold design is very good, the specific set of map method here do not do a detailed introduction.

2. In the product analysis to be carried out after the work of the product analysis of what kind of mold structure, and the product row process to determine the work of the workmanship, and the use of design software for product development, when the product is generally from the follow- Forward, for example, a product requires the amount of five processes, stamping is completed in the product from the beginning of the product drawings to the four works, three works, two projects, a project, and start a copy of a copy of the previous project To complete the work of the five projects to complete the work, and then carry out meticulous work, note that this step is very important, at the same time need to be particularly careful, this step to complete the good words, drawing mold will save a lot of time, After the stamping of each project to determine the content, including in the mold, the thickness of the product material to retain the inner and outer lines to determine the size of the use of convex and concave mold, the method of product development is no longer described here, will be in the product development method Specific introduction.

3. Preparation, according to the product development plan for preparation, in the drawings to determine the template size, including the fixed plate, unloading board, convex and concave mold, inserts, etc., pay attention to the product directly in the map to prepare, so that is very Great advantage, I have seen a lot of mold designers directly to the product diagram for manual calculation to prepare, this method is too low efficiency, directly on the drawings to draw the template size, in the form of a group of statements, one Can be completed on the preparation of materials, on the other hand in the mold of the work of the accessories to save a lot of work, because the work in the drawing of the components only need to add in the preparation drawings positioning, pins, guide posts, screw holes can be.

4. After the completion of the preparation material can be fully into the drawing of the drawing, in the preparation of a copy of the drawings, the components of the drawing, such as adding screw holes, guide hole, positioning holes and other holes, and in the punching mold All kinds of holes need to cut the wire through the hole, in the mold, the upper and lower mold forming gap, must not forget, so these work is completed after a product of the mold has almost completed 80%, in addition to drawing the mold map process Note: the process, refers to the production, such as pliers line, line cutting until the different processing processes have a complete production of a good layer, so that the line cutting and drawing management has great benefits, such as the distinction between color, size The annotation is also a very important job, but also a most troublesome job, because it is a waste of time.

5. After the above drawings are completed, in fact, can not release the drawings, the need for proofing of the mold drawings, all the accessories set up, for each piece of different mold plate to create a different layer, and the same benchmark, such as guide hole Group analysis, and the process of product development plans set into the group diagram, to ensure that the template hole and the bending position of the upper and lower mold clearance with the correct.